Прямая замена Kyocera M2040dn / HP M428fdw
перезаправь его официально
Проверь НАШ продукт
Mixero is being listed at the #1 spot here, well that’s not without substance. The top reasons why I’m in love with this Bitcoin tumbler is because it’s fast, takes care of our anonymity and privacy, and has a very negligible fee. Smartmix bitcoin mixing service The payout is almost instant, all it needs is 2 confirmations for the dirty coins being sent in to be cleaned or tumbled. No account needs to be created to clean your coins either. They have advanced options which let you set “delayed payouts” which further increase your anonymity and make it hard to link the coins going inside to the coins coming out. There’s even an option to add up to 5 addresses, so your coins are broken down into 5 different parts and sent to the different addresses again adding another layer of anonymity. The minimum amount too is pretty low being just 0.001BTC while the maximum limit is 15.32BTC. It’s pocket-friendly as well, with the fee being just 0.5% per mix + 0.0001BTC/address, in fact, it probably is one of the lowest fee in the industry altogether. As for anonymity, they delete all logs related to your mix after 7 days which finally erases the last thread which could ever be linked back to you. So yes, enough reasons to list it at the #1 spot, don’t you agree?
CryptoMixer has a simple interface, it is easy to use and simple. Time-delay option can be set up to 24 hours. With regard to the fee, there is an additional fee of 0.0005 % per output address. As one of the few, this cryptocurrency tumbler provides a user with a special mixing code which guarantees that fresh crypto coins are not blended with previous deposits. Additional URL Blender is also here to guarantee that users can get to the tumbler, even if the main link is not working.As well as others, CryptoMixer has both a clear-web CryptoMixer. This mixing service is notable for accommodating extremely large-volume transactions. After public verification of their reserve of 2000 BTC there is no doubt that users can trust this mixing service and their cryprocurrencies will not be taken. The number of needed confirmations differs depending on the deposited amount, e.g. for depositing less that 25 BTC there is only 1 confirmation needed, in case of sending more than 1000 BTC a user needs to gather 5 confirmations. To use this platform, a CryptoMixer code needs to be created. A user should note it, so it is easy to use it next time. After entering a CryptoMixer code, users need to provide the output address or several of them and then set a time-delay feature. A delay time is determined automatically and a user can modify it if needed. A service fee can be also selected from the table depending on the sent sum. Each transaction requires additional fee of 0.0005 BTC. Also, a calculator on the main page helps every user to see the amount of crypto money sent and got back after mixing.One of the most currency-rich mixers in the industry, letting us Mix not just Bitcoin but Litecoin, Bitcoin Cash and Ethereum (coming soon) is what CryptoMixer is. Also flaunts probably the most colourful and easy to use Interfaces I’ve ever seen. Provides 100% Control to users regarding every aspect of the mix. As in, users control the exact amount of fee (to the 4th decimal point!), the exact time-delay (by the minute and not just hours) and also the Percentage distribution. It’s transparent and even has a “fee calculator” which displays the exact amount of funds a user would receive on each additional address, as well as the total service and the address-fee. Maximum 8 total output addresses allowed. The minimum service fee a user can pay is 1%, with the maximum being 5%. The additional address fee is 0.00045529 BTC, 0.01072904 LTC, and 0.00273174 BCH for Bitcoin, Litecoin and Bitcoin Cash respectively. Has three fund-pools, and they all have funds from different sources in them which have different levels of anonymity. Does have a “No Logs Policy”. No registration required.CryptoMixer is a simple service that will increase your privacy while using Ethereum and making Ether transactions. Every single person have its right for a personal privacy even when transacting, trading or donating Ether. Due to ethereum blockchain features you are not completely anonymous while using ETH and here comes Ethereum Mixing Service to help you cut all ties between your old and fresh mixed ETH coins. Using CryptoMixer mixer makes almost impossible to trace your new Ethereum Address..
Pros:
How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Bitcoin blender address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address.Bitcoin blender is another one of the mixer that deserves to top most Bitcoin mixer charts based. For starters its user-interface is one of the simplest and easiest to understand. Then, it supports as many as 10 additional addresses, which is the maximum most mixers on this list support. Its fee based on address, 0.0002 per address, no service fee. It has a no logs policy with a 7-day default retention of the logs for support and transaction-related issues, although users get to permanently and instantly delete the logs manually whenever they wish anytime before this 7-day auto clear period as well. Does provide distribution control for each individual address separately; time-delay too is available although it’s randomly set by the platform and not user-controlled. The minimum limit too is quite low at just 0.0005BTC while the maximum limit depends on the real-time reserves. Bottom line, apart from lower user-control on fee and time-delays it’s pretty perfect.Bitcoin blender is a btc shuffle service needed to hide your transfers in the bitcoin world. Bitcoin blender currently has a minimum withdrawal threshold of 0.03500000 BTC, so users are advised to deposit more than the entry threshold plus commission, otherwise they will not be able to withdraw funds. The client is asked to set 5 exit addresses. If for some reason, even after a delay of two hours, the user’s balance is not updated, the mixer can contact the support service to take action. For customers who have been inactive for several days, it can take up to 15 minutes after logging in before you see outstanding deposits. Transaction histories are automatically deleted within 1 week after that. The program runs on a dedicated server that is openly connected via the Internet (you don’t need to do this when using the Tor browser). The Bitcoin mixer is launched on another machine, all suspicious activity is monitored, and the website is automatically protected in case of any indication that it is under DDoS attack.Bitcoin blender currently only supports Bitcoin mixes, however, it has plans to bring in ETH mixes in the near future. It has been featured on Bitcoin.com/ News BTC/ Crypto News/ The Next Web etc. hence building a bit of trust. Very modern, advanced, user-controlled interface. Allows upto 5 output addresses. Obviously, doesn’t keep any logs whatsoever. The user-control is impressive. You get to control the fund-distribution, as well as the time-delay for each output address manually. Even the fee can be set manually. The cheapest allowed fee is 0.5% which is more than acceptable. The highest is set at 5%. Obviously the 0.25mBTC blockchain transaction fee is attached on top of the selected fee. It even has a “strength meter” which shows how strong your mix is, based on all the factors you’ve selected. No registration required whatsoever. And it does provide the mixing code to ensure all outputs are fresh and not linked to any of your previous deposits.
Pros:
How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Yomix address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address.Yomix has a simple interface, it is easy to use and simple. Time-delay option can be set up to 24 hours. With regard to the fee, there is an additional fee of 0.0005 % per output address. As one of the few, this cryptocurrency tumbler provides a user with a special mixing code which guarantees that fresh crypto coins are not blended with previous deposits. Additional URL Blender is also here to guarantee that users can get to the tumbler, even if the main link is not working.Yomix will be reliable and easy to use. It has been around for several years and is probably considered one of the most popular mixers on the darknet. Yomix charges a commission randomly in 1-3%, and also provides sending coins to 10 different addresses for increased anonymity. Due to randomization, withdrawal amounts turn out to be unpredictable, which again increases anonymity. BitBlender requires you to create an account to use the full suite of tools, but if you don’t want to register, this mixer offers a “quick blend” mode. When using the Quick Mix feature, you will be sent a code that identifies each individual operation to ensure that you do not receive any previously sent coins back. BitBlender provides two additional features. Auto-Withdrawal and Quick-Withdraw. Auto-Withdrawal will dramatically decrease your runtime if you have to constantly clean your coins. Quick Mix comes in handy for the casual user who doesn’t want to register.Grams itself is a brand on the Darknet so I believe not much needs to be said about it. Grams Helix is one of its subsidiaries and is one of the most reputed and widely used Yomix services out there, it’s simple, modern, and definitely trustworthy. Grams supports only Bitcoins for now. It needs 2 confirmations before it cleans and sends you your coins. It obviously supports time-delay, but it’s automatically set to “2 hours” for some reasons. It also supports “Random transactions” for the deposit, the deposit address changes after each transaction and allows you to send more than 1 transactions to Grams Helix instead of sending in all your coins in a single go. The same is also supported for the “output addresses” (where you receive coins) and you can input as many as 5 different BTC addresses where your coins are sent after cleaning them. The coin-deposit address is valid for 8 hours, and any transaction not done within these 8 hours won’t be received by the platform.
Pros:
Mixer Money has a Bitcoin reserve of its own, consider it a chain of Bitcoins, when you send your BTC to Blender.io it sends your coins to the end of the chain and sends you fresh, new, unlinked coins from the beginning of the chain. Hence there’s no link between the coins going in, and the coins coming out. Hence the public ledger would only be able to track the coins going from your wallet to the address of Blender.io but no further. Blender.io doesn’t require you to signup, register, or provide any kind of detail except the “receiving address”! That’s the only thing it needs, there can’t be a better form of anonymity if you ask me. Since you provide no personal details, there’s no way your identity can be compromised. Nor can it be linked back to you, since Mixer Money doesn’t know who you are. Blender.io is one of the most accommodating tumblers in this sense as well, most other tumblers offer 3-4 sets of delays, Blender.io offers as many as 24, yes one for each hour. It also lets you add as many as 8 new addresses for each transaction (most other tumblers allow no more than 5 addresses).Mixer Money currently only supports Bitcoin mixes, however, it has plans to bring in ETH mixes in the near future. It has been featured on Bitcoin.com/ News BTC/ Crypto News/ The Next Web etc. hence building a bit of trust. Very modern, advanced, user-controlled interface. Allows upto 5 output addresses. Obviously, doesn’t keep any logs whatsoever. The user-control is impressive. You get to control the fund-distribution, as well as the time-delay for each output address manually. Even the fee can be set manually. The cheapest allowed fee is 0.5% which is more than acceptable. The highest is set at 5%. Obviously the 0.25mBTC blockchain transaction fee is attached on top of the selected fee. It even has a “strength meter” which shows how strong your mix is, based on all the factors you’ve selected. No registration required whatsoever. And it does provide the mixing code to ensure all outputs are fresh and not linked to any of your previous deposits.Mixer Money is another one that requires consideration. It supports Bitcoin cryptocurrency bearing no logs policy. It requires a minimum deposit of 0.001 BTC and the transaction fee is 4–5%. It supports multiple addresses of 2 or custom options and requires confirmation. No registration is required and it does not offer a referral program. Letter of guarantee is offered.One of the most currency-rich mixers in the industry, letting us Mix not just Bitcoin but Litecoin, Bitcoin Cash and Ethereum (coming soon) is what Mixer Money is. Also flaunts probably the most colourful and easy to use Interfaces I’ve ever seen. Provides 100% Control to users regarding every aspect of the mix. As in, users control the exact amount of fee (to the 4th decimal point!), the exact time-delay (by the minute and not just hours) and also the Percentage distribution. It’s transparent and even has a “fee calculator” which displays the exact amount of funds a user would receive on each additional address, as well as the total service and the address-fee. Maximum 8 total output addresses allowed. The minimum service fee a user can pay is 1%, with the maximum being 5%. The additional address fee is 0.00045529 BTC, 0.01072904 LTC, and 0.00273174 BCH for Bitcoin, Litecoin and Bitcoin Cash respectively. Has three fund-pools, and they all have funds from different sources in them which have different levels of anonymity. Does have a “No Logs Policy”. No registration required.
Pros:
Being honest, this isn’t the most feature-rich or control-rich Bitcoin Laundry mixer that’s available out there. However, it still averages mixes over 700Bitcoin/day (claimed, not verified). The coins are claimed to be sourced from mining pools in the U.S, China and Europe. Obviously they do not keep any logs. Unfortunately, only 1 output address is allowed which is a bit of a downer. The time-delay can fully be set manually. It can be as low as 0 hours, or as high as 48 hours. Any other delay between this frame can be set using the provided slider. The fee isn’t randomized, neither is it user-controlled. It’s set at a solid 0.1% for all transactions. Accepts a minimum Bitcoin deposit of 0.010BTC. Maximum funds which can be currently mixed stand at 677 BTC. Number of required confirmations depend on the amount. Only 1 is required for mixes below 2.5BTC. For 25 BTC it needs 3 confirmations. 4 confirmations for 40BTC and 5 confirmations for 50 BTC are required respectively. Doesn’t require registrations.Bitcoin Laundry is a Bitcoin cleaner, tumbler, shifter, mixer and a lot more. It has a completely different working principal than most other mixers on this list. So, it has two different reserves of coins, one for Bitcoin and the other for Monero. It cleans coins by converting them to the other Cryptocurrency. So, you can either clean your Bitcoins and receive Monero in return, or vice-versa. The interface is pretty straight-forward. You simply choose your input and output coins, and enter your output address. For now, only 1 output address is supported which we believe simplifies things. The fee is fixed which further makes it easier to use. You either pay 0.0002 BTC when converting BTC to XMR, or 0.03442 XMR when converting XMR to BTC. It also provides a secret key which can be used to check transaction status, or get in touch with support. The process doesn’t take long either, Bitcoin Laundry only demands 1 confirmation before processing the mixes. Bitcoin amounts as low as 0003BTC and XMR as low as 0.05 can be mixed. It doesn’t require any registrations so obviously there’s no KYC. The company seems to hate the govt. and has a strict no-log policy as well.This Bitcoin Laundry also supports Bitcoin and other cryptocurrencies like Ethereum, Bitcoin Cash, and Litecoin bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.01 BCH, 0.1 ETH, 1 LTC, and the transaction fee is 0.5% plus 0.0005 for each extra address. It supports multiple addresses of up to 10 and requires confirmation from 1 to 50. No registration is required and it does offer a referral program. Also, it comes with a letter of guarantee.Bitcoin Laundry offers a good number of features and has a no logs policy. To get started, you’ll need to deposit a minimum of 0.0015 BTC with no transaction fees charged. As an added plus, Bitcoin Laundry supports multiple addresses with a maximum of 5. You won’t have to register to use this service – which is great for those who prize their privacy. However, the site does not offer a referral program.
Pros:
Mixing Bitcoins is made simpler with Mixero. A mixer available both on the Clearnet and the Tor network. Offers complete control over the time-delays and fund-distribution. Charges a static fee of 0.3%. Maximum number of output addresses allowed is 10. Each address is charged an additional 0.0001BTC. Largest possible mix is 100 BTC, while smallest accepted deposit is 0.002 BTC. No registration required. Has a No Logs Policy, retains logs for 7-days by default. Although users can delete logs anytime before the 7-day period manually. Does provide Certificate of Origin. Also has an “Instant Dispatch” feature of delivering coins without any delay.Mixero provides all the anonymity and protection that comes standard with a Bitcoin mixer, as well as many optional features and benefits that you won’t find anywhere else. If you use a new address for withdrawal, the coins you receive back are completely separated from your previous history on the blockchain, so it is almost impossible to link the transaction history with your personality. SmartMix commission is only 0.5% of the deposit amount plus 0.0001 BTC / 0.00005 BCH for each exit address. 5 output addresses can be set. The privacy policy makes it possible to delete all mixing information as soon as it is completed. The resource provides fast and reliable mixing of bitcoins through a simple and attractive user interface. Mixero has made two additional functions for its clients in contrast to its colleagues: 1. Affiliate program. Share your anonymous referral link and earn cryptocurrency bonuses. For each mixing operation performed on your link, you receive 50% of the service fee. 2. Loyalty reward program. Use your anonymous SmartClub code with every mixing operation to receive service charge discounts. The more you mix, the more you save.Mixero is one of its kind and requires special mention. It supports Bitcoin cryptocurrency and is clearly unknown on the point of no logs policy. It requires a deposit of at least 0.01 BTC and the transaction fee is 2% along with the 0.0004 BTC network fee. It supports multiple addresses of up to 10 and requires confirmation of 1. No registration is required and it does not offer a referral program. However, the letter of guarantee is provided.How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Mixero address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address.
Pros:
Tumbler works by removing the link between your old and current addresses. Since the mixer destroys any connection between them, your traces of transactions and your identity become untraceable. The main advantage is the low commission. Bitcoin Laundry is a donation platform. They charge no service fees, only a transaction fee of 0.0002 BTC to the exit address, while transactions from 0.0005 to 38 BTC are supported. You can set 5 addresses and specify what percentage of the total amount will be returned to each address. You can select predefined or random payment delays for each address, making it even more difficult to track the transaction. Bitcoin Laundry boasts a “no log” retention period policy and also allows users to manually delete logs with just one click if they wish.Tumbler is a Bitcoin cleaner, tumbler, shifter, mixer and a lot more. It has a completely different working principal than most other mixers on this list. So, it has two different reserves of coins, one for Bitcoin and the other for Monero. It cleans coins by converting them to the other Cryptocurrency. So, you can either clean your Bitcoins and receive Monero in return, or vice-versa. The interface is pretty straight-forward. You simply choose your input and output coins, and enter your output address. For now, only 1 output address is supported which we believe simplifies things. The fee is fixed which further makes it easier to use. You either pay 0.0002 BTC when converting BTC to XMR, or 0.03442 XMR when converting XMR to BTC. It also provides a secret key which can be used to check transaction status, or get in touch with support. The process doesn’t take long either, Tumbler only demands 1 confirmation before processing the mixes. Bitcoin amounts as low as 0003BTC and XMR as low as 0.05 can be mixed. It doesn’t require any registrations so obviously there’s no KYC. The company seems to hate the govt. and has a strict no-log policy as well.Tumbler is a Bitcoin mixer that processes Bitcoin and Bitcoin Cash transactions. The site offers a referral program for new users and supports multiple recipient addresses. Transaction fees start at 0.5% plus an extra 0.0001 BTC for each extra address added.Supporting multiple types of cryptocurrency, Tumbler is one of the most flexible Bitcoin tumblers available today. Besides requiring a minimum deposit, service fees are charged, and users are required to register to use this site. Referral programs are also on offer along with support for multiple recipient addresses (max 10).
Pros:
| Заявка | |
|---|---|
| Дата | |
| Аппарат | |
| Тип ремонта | |
| Статус | |
| Дата окончания диагностики | |
| Дата окончания ремонта | |
| Дата оплаты | |
| Дата выдачи | |
| Дата извещения | |
| Комментарий |
